Alumax P-DRA1Y - Manual (Page 12)

12
TOP ROLLERS INSTALLATION 5
5
GLASS HOLE
WASHER
POSITION 1
POSITION 2
WASHER
2
14 CONTINUED
4D
Reposition the fixed panel assembly in
place, ensuring that the fixed panel (7) nests
within the bottom glass clip retainers (11) (12)
and that the wall bracket blocks (2) insert
themselves within their back plates.
Permanently secure the wall brackets by
way of the socket cap screws, as illustrated.
Assemble a set of double rollers (5) to the
door panel’s (6) top holes. Note the position
of the excentric washers in the illustrations.
The washers are to be oriented to position 2
if in step 8 the gap between the bottom edge
of the door panel and the threshold is generous.
Such a gap may lead to water leakage
outside the showering area.
7
12