AVer EXR6004-Mini quick guide - Manual (Page 10)

English-4
For the First Time Using the DVR Unit
i
The DVR system starts up will take a while, please be patient and wait.
Step 1. Connect the mouse to DVR unit(through USB interface).
Step 2. Power on the DVR unit. The preview UI will appear on the surveillance screen.
i
For security purpose, the DVR system would require you to enter User ID and Password
before it can be accessed. (If this is the first time, enter the default ID [admin] and password
[admin]).
Step 3. Formatting hard disk
i
If the hard disk has been format, skip this step.
a. Click Setup and enter the password
b. Click System
→ Add
c. Select the hard disk from device list and select Format type
d. Click Format button to start formatting
e. When formatting is done, click OK.
Step 4. Setup the date and time in order to have correct recording time and date.
a. Click Setup and enter the password
b. In Time section, click Setting button of System Time.
c. Select the date and adjust the time, and then, click OK.
Step 5. Connecting IP Camera
a. Click Setup
→ Camera
b. Select camera channel and type of camera – IP Camera
c. Then, enable the camera
d. Click IP Setting