Hardware installation – AVer EXR6004-Mini quick guide User Manual
Page 8
![background image](/manuals/634459/8/background.png)
English-2
Hardware Installation
A.
Install the hard disk
i
The DVR unit may include hard disk that depends on the model user has purchased. If the
model user has purchased is included hard disk, user doesn
’t need to install the hard disk by
yourself.
Follow the steps to install the hard disk:
1. Loosen all screws
2. Push the cover backward and lift
3. Secure the HDD holder on the hard disk.
The position to screw the HDD holder on
hard disk must same as figure shown.
Otherwise, the hard disk won
’t be able to fit
into inside the DVR unit.
4. Connect the SATA cable and the power
connector to the hard disk
5. Secure the hard disk inside the unit then
place unit cover
6. Push the cover forward and secure the
cover
7. You may now connect all the cables. When the power is connected, the Power LED light
turns on.