AVer EH11116H-4 series user manual - Manual (Page 48)

38
Name Function
(18) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are capturing motionless
picture and #2, if it captures lots of movement.
i
De-interlace function only support for analog camera channel in single screen display mode..
(19) Turbo
To improve the smoothness of live video. The default is enabled( ), but in following
situation:
- The channel is IP camera and is in 1-split screen.
- The channel is remote DVR and is in 1-split screen.
Turbo function setup is in depended for each channel. To turn off turbo function ( ), click
turbo button.
[Note] In multiple split screen mode, the turbo button is gray out.
The turbo button is
gray out in multiple
split screen mode.