AVer EH11116H-4 series user manual - Manual (Page 75)

65
CHAPTER 3
Detail: The setting of advanced IP cameras are related to the Intelligent Streaming function in System
setting. Click Default will back to the factory default value.
The Detail setting only support for the AVer IP camera series.
 Stream Setting: user can setup Codec, Resolution, FPS, Bitrate Mode, and Quality Bitrate of
Stream 1, Stream 2, and Stream 3 on the selected IP camera channel. The Stream 1 is enabled in
default.
 Stream Selection: user can setup which stream (Stream 1 ~ Stream 3) to use on Record,
Preview(Quad and Single mode), and Remote site.
 Video Adjustment: user can adjust Brightness and Contrast of IP camera.
The selection and adjustment items may vary by the camera supported.