AVer E-I/O BOX - Manual (Page 7)

7
Setting E-I/O Box Configuration
To set the E-I/O Box setting:
1. Run the DVR program.
2. In the Preview/Advanced screen mode, click .
3. When the DVR configuration setup selection appears, click Sensor or Relay.
4. In the Sensor or Relay Setting dialog box, click External IO button.
Sensor Setting UI Relay Setting UI
5. In the External I/O Setup windows, click Add to set an E-I/O Box, Modify to change the E-
I/O Box setting, and Delete to remove the selected E-I/O Box. Click Exit to save and close
External I/O Setup windows.