AVer E-I/O BOX - Manual (Page 8)

8
6.
In the Add Connection windows, mark Enable box to enable this E-I/O Box.
7. Select the Brand of E-I/O Box from drag down list.
8. In Port Setting, use the default value.
9. Click OK to save the setting and Cancel to exit without saving the new setting
10. To add more than one E-I/O Box, click Add and follow the above step 5~9.
11. In E-I/O Box setup dialog, it will list all added External I/O. Select added E-I/O box and click
Add to enter Add Module window for scanning all connected sensors and relays.
12. In Add Module windows, click Scan to scan the connected relays and sensors on the E-I/O
Box.