B&M 10228 TRANSPAK - Manual (Page 5)

5
Figure 10
STEP 15. Remove 2nd gear accumulator spring
(See Figure 11) and discard. 727 CASE ONLY:
install steel orifice plug just below the surface in
Figure 11 Figure 12
pressure regulator spring seat
inside edge
adjustment screw
the indicated hole, using a flat nose punch.
STEP 16. Install the B&M blocker rod as shown
below (See Figure 12):
727 CASE ONLY:
install steel orifice plug here
2nd gear accumula-
tor spring (discard)
B&M blocker rod