B&M 45043 PRECISION SPORT SHIFTER - O4 + GTO - Manual

9500806-03 Printed in the U.S.A.
I
nstallation Instructions
Precision Sport Shifter
2004 and up Pontiac GTO
(see www.bmracing.com for the latest vehicle fitment applications and model years)
Part Number 45043
©2010, 2005, 2004 by B&M Racing and Performance Products
This B&M Precision Sport Shifter has been designed to work on most 2004 and up Pontiac GTO model vehicles
equipped with a manual transmission. It has been engineered to greatly reduce shift throw and improve shifter feel. Check
the parts and tools lists at the beginning of these instructions for the supplied parts and the tools required to install your
B&M Precision Sport Shifter. Installation of this B&M Precision Sport Shifter can be accomplished by anyone with
minimal mechanical experience.
INTRODUCTION
This B&M Precision Sport Shifter can be installed in less than two hours by carefully following the instructions. Read
all instructions first to familiarize yourself with the parts, tools, and procedures. This kit contains all the parts necessary
to install the shifter.
Please note that vehicles used in competition or vehicles that my experience extreme vibration and/or heat may
require lock wiring (safety wiring) and/or other methods to prevent some fasteners from loosening.
PARTS
Shifter
Spring (2) B
A
1/4-20 bolt (2) E
M8 x 50mm Set
screw (2)
F
Thin M8 Hex Nut (2) G
Lock washer (2) C
Flat Washer (2) D