Carrier Access 770-0015 AM - Manual (Page 135)

IP Router - Release 1.8 5-35
Profile Directory:Remote Profile
Filter Network/Server
Filter Network/Server
This screen allows you to filter the Remote (WAN) networks/servers in two ways,
depending on which mode is selected. The <Filter> mode causes the unit to learn all
networks/services on known networks, and then advertise these services to the LAN.
In the <Learn> mode the unit will disable or restrict learning of networks/services.
Under this mode, services will only be learned if they are selected or added. For
example, when you enter the current screen, all known networks/services will be
displayed, since the <Filter> mode is the default mode. If you wish to restrict which
services are learned you may change the Selected Items field to <Learn> and then
enable only selected services displayed on the screen. Once you exit this screen and
save the changes, only those services that you enabled and/or added will be learned and
displayed.
Since the <Filter> mode learns all services, it may be most appropriate for smaller
networks. The <Learn> mode however, may be best for larger networks since it allows
you to restrict which types of services are learned.
1. Select Configuration <Profile Directory> from the Main Menu, and press
[E NTER ].
2. Select WAN <Setup -> on the RemoteUnit line and press [E NTER ].
Profile
Directory
Window