Connecting to the router, Establish a telnet session, Connecting to the router -5 – Carrier Access 770-0015 AM User Manual
Page 15: Establish a telnet session -5
Advertising
IP Router - Release 1.8
1-5
Introduction
Connecting to the Router
Connecting to the Router
Establish a Telnet Session
1. Use the
telnet {rtr_card-addr}
CLI command to connect to the Router
card. The following example is when the router is located in slot 5.
> telnet 5
Connected.
Escape character is ’^]’.
Attempting Carrier Access QTSR connection...
QTSR [Sat Apr 10, 2004 10:51:23] (<CR> to login)
2. Select [E
NTER
] or <CR> to log in.
Password >
3. Enter default password (
admin
) and press [E
NTER
].
Password >*****
Select a terminal type...
(<space> or <back-space> to toggle, <CR> to accept)
Terminal: <VT100>
4. Select Terminal Type: scroll through options with the [S
PACEBAR
] and then
[E
NTER
] to select. Recommended <generic>.
Terminal:
<generic>
Advertising