B&M 70233 TRANSKIT - Manual (Page 3)

3
104 3-4 Clutch Backing Plate
105 3-4 Clutch Retaining Ring
106 3-4 Clutch Boost Springs
100 3-4 Clutch Apply Ring
102
B&M
3-4 Clutch Apply Plate
103 3-4 Clutch Plates
Figure 3
: 3-4 Clutch Assembly.
3.71"
100
106
105
104
103
102
Original 3-4 clutch apply
plate and retaining ring
New 3-4 clutch apply plate.
(Does not need retaining
ring)
Figure 4
: 3-4 Clutch Apply Plate
PLATE THICKNESS PART NO. ID NO.
7.125mm (.281") 8642621 1
6.125mm (.241") 8642622 2
5.125mm (.202") 8642623 3
4.125mm (.162") 8642624 4
USE BACKING PLATE WHICH GIVES A CLUTCH PACK CLEARANCE OF 1.00mm-2.50mm (.039"-.098")
Figure 2: 3-4 Clutch Backing Plate Selection.