B&M 77105 STARTER, GM, 168T RING GEAR, STAGGERED MOUNT User Manual
Page 3
Advertising
3
STEP 9. Reconnect the battery
terminals, starting with the positive
and ending with the negative.
STEP 10. Start the engine. In order
to not exceed the duty cycle of the
starter, please do not operate the
starter for more than 30 seconds at
a time. Allow the starter to cool at
least two minutes between repeated
cycles.
Figure 4: Checking Gear Mesh
Figure 5: Mounting Flange Shim with Trimming
Instructions (if required)
Advertising
This manual is related to the following products: