Canon IMAGEFORMULA CR-190I M111021 - Manual (Page 17)

16
5
Spin the rollers while wiping them clean with a firmly
wrung cloth dampened with water or a mild detergent.
There are 26 roller positions, as shown in the diagram below.
NOTE
• Use cotton swabs to clean the rollers in locations that are too narrow
for your fingers.
• Roller in position c is turned by the roller in position a. Turn the
roller in position a to wipe the rollers.
• Rollers in positions h, j, and l are turned by the roller in position
k.Turn the roller in position k to wipe the rollers.
• Rollers in positions u to z are turned by the roller in position m.
Turn the roller in position m to wipe the rollers.
• Rollers in positions a to c are replaceable. (See “Replacing the
Rollers” on p. 24.)
6
Use cotton swabs that are commercially available to
clean the entire scanning glass.
7
Close the Back Maintenance Cover.
Ԙ ԙ
Ԛ
ԛ
Ԝ ԝ
Ԟ
ԟ
Ԡ ԡ
Ԣ
ԣ
Ԥ
ԥ
Ԧ
ԧ
Ԩ
ԩ
Ԫ
ԫ
   
 
 
 
 
Scanning Glass