Canon IMAGEFORMULA CR-190I M111021 - Manual (Page 9)

8
5
Instruct scanning to start from the software application.
NOTE
• When Using the Accompanying Scanning Utility for CR-190i:
There are three scanning methods as follows. Follow the each
instruction.
Scan 1 page
Click [Scan Page] from the [File] menu.
Scan Batch to File
a Click [Scan Batch to File] from the [File] menu.
b Input the File name, and then click [Save].
c Select Simplex or Duplex, and then click [Start Scanning].
Scan Batch to Printer
a Click [Scan Batch to Printer] from the [File] menu.
b Select Simplex or Duplex, and then click [Start Scanning].
• You can also start scanning with pressing the START Button.
6
Scanning starts.
NOTE
• If “Sort Method” is set in the software application, the document will
be ejected to one of the three Eject Pockets according to the sort
methods that have been set.
• When printing with the imprinter, ink may get on the leading edge of
the document because the documents are ejected onto the printed
surface.
• When Using the Accompanying Scanning Utility for CR-190i:
Scanning is suspended and a message is displayed when the Eject
Pocket becomes full of documents. Scanning resumes when the
documents are removed from the Eject Pocket (Eject Pocket full
detection).
Eject Pocket 3
Flapper
Separates documents
Eject Pocket 2
Eject Pocket 1
Ink residue
Printed text or bitmap
(back side)