B&M 81035 CONSOLE MEGASHIFTER FOR 68-69 CAMARO - Manual (Page 3)

3
PERIODIC INSPECTION AND MAINTENANCE OF YOUR SHIFTER IS RECOMMENDED TO ENSURE THAT
THE MECHANISM IS WELL LUBRICATED, FREE FROM DIRT OR RUST AND THAT THE CABLE IS
PROPERLY ADJUSTED. LACK OF MAINTENANCE COULD RESULT IN A FAILURE INCLUDING A FAILURE
OF THE REVERSE LOCKOUT SAFETY FEATURE.
WARNING
the shift handle forward or backward with a
quick firm action until it hits the internal stops,
and allow it to spring return to the center
position. The shifter is now ready for the next
shift.
To switch the shifter from RATCHET mode
back to the STRAIGHT GATE mode, operate
the shifter to the Drive gear position, pull up
firmly on the trigger to engage the STRAIGHT
GATE mode and move the handle forward to
Neutral, Reverse and Park.
REMEMBER: To switch from the STRAIGHT
GATE mode to the RATCHET mode or from
RATCHET mode to STRAIGHT GATE mode
you must be in the Drive gear position. Refer
to the shift indicator gear position.
SPECIAL NOTE: If the instructions for oper-
ating your shifter seem complicated, DO NOT
BECOME ALARMED. You will find that in
actual use the shifter will be extremely easy
to operate after a minimal amount of experi-
ence. Caution: The shifter is an important
controlling mechanism of your vehicle and
can create serious driving hazards when
any part is loose, missing or misadjusted.
After you have installed your shifter we
recommend you review the instructions to
assure a complete and proper installation.
Sheet metal
screw (2)
E-clip
Bracket
Indicator
cable
Remove this blocker pin
and E-clips with four
speed transmission
Washer (2)