Salter Brecknell B120 - Manual (Page 15)

13
7.0 Setting the Auto-Off Timer
You can set an auto-off timer so that the scale will power down automatically
after a period of inactivity. This functions only when the scale is powered by the
battery.
1. From normal mode, press and hold the On/Off and Accu keys at the
same time until the scale beeps…
SEtUP
is displayed in the WEIGHT window, A.oFF.t is displayed in
the PIECE WEIGHT window and the current value for the auto-off
timer is displayed in the COUNT window. You can choose from 0 to
30 minutes. If you pick 0, auto-off is disabled and the scale will not
power down automatically.
2. Key in the number of minutes of scale inactivity that will trigger the auto-
off function and press the Enter key to accept this value…
The scale returns to normal mode.
8.0 Setting LED Brightness
You can set the LED brightness by following these instructions:
1. In normal weighing mode, hold the ON/OFF and ENTER keys at the
same time until
SETUP
is displayed in the WEIGHT window, Led.brn (LEd
brightness) is displayed in the PIECE WEIGHT window, and x (x=1-3)
is displayed in the COUNT window. This means that the LED
brightness is currently set to x.
2. Press the 1 2 or 3 numerical key to change the brightness level. Three
is the brightest level. When the brightness you want is displayed, press
the ENTER key save this setting.
The scale will auto-reset and return to normal weighing mode.