Salter Brecknell S100 - Manual (Page 14)

Calibration Menu
Calibration can be done with 25% to 100% of requested load and can be calibrated with 1 or 2 calibration points
1.
On/Off
Zero
+
Tare
2.
Tare
3 .
Tare
4. Enter in calibration weight from 25% to 100% full capacity
25%-100%
kg/lb
5. Single point calibration, enter the same weight in again and move to number 7
For 2 point calibration enter in the second calibration weight between 25% 100% full capacity.
Tare
6.
7
Tare
8.
9.
Tare
Z ERO
0
25%-100%
kg/lb
100.00
Hold
Print
Units Tare
50.00
Hold
Print
Tare Units
Units
Change flashed digits
Tare
kg
Saves data and move down
to next Parameter setting
.
On/Off
Zero
Exits setup mode
Hold
Print
kg
Moves flashing digit