CASO Germany MCG 20 chef - Manual (Page 59)

caso MCG20 Chef 59
 Close doors
Close the door using the door handle until the door latch audibly locks in
place. If a current cooking programme was interrupted as a result of opening
the door, the current cooking programme will be continued after pressing the
button Start/Quick Start.
12.5 Switch on/off sound
Press the button Power level/sound for three seconds in order to switch on
or off the sound (beep tone).
You can hear messages of the programme ending and warning signals even
if the sound has been switched off.
12.6 Activation after selecting the programme
After selecting the program, press the control dial on the device (Start /Quick
start button), to start the preset cooking programme.
12.7 Quick start
Utilise this function to programme the oven for comfortable cooking at 100%
microwave performance.
Press the Start/Quick start button in quick sequence to set the cooking time.
The oven starts automatically after 2 seconds.
Once the end of the cooking time is reached, four signal tones will be emitted
and END will appear in the display.
12.8 De-activation:
In order to interrupt an ongoing cooking programme, you can proceed as
follows:
Pres the Stop button once. The cooking programme that is in use will be
stopped.
Open the door of the device. The cooking programme that is in use will be
stopped.
To continue the interrupted cooking program, press the button Start/Quick
start after closing the door.
To terminate the interrupted program, press the button Stop a second time.
Please note
Before beginning a different cooking process you must delete the display and
reset the system by pressing the button Stop.
12.9 Setting the clock
To set the clock on the device, proceed as follows: