Care and cleaning – Catler JE 8011 User Manual

Page 27

Advertising
background image

CARE AND CLEANING

Always ensure that JE 8011 Juicer is switched
off and that the power is switched off at the
power outlet. Then remove the plug from
the power outlet before cleaning, disassem-
bling or assembling and storing the appli-
ance.

Follow these instructions to clean all surfa-
ces of parts that come into contact with
food during normal use.

For easy cleaning – immediately after each
use rinse removable parts under running
water. Allow parts to air dry.

After disassembling the unit (see pages
19–24) all removable parts may be washed
in hot soapy water, then rinsed well and
dried.

The Catler Juice Processor juice cover, filter
bowl surround, pulp container, puree disc,
stainless steel filter disc and 1.2L juice jug
are dishwasher safe (Top Shelf only).

Wipe the motor base with a damp cloth.

For consistent juicing results always ensure
that the Juice Disc is thoroughly cleaned us-
ing the supplied nylon brush. Using the ny-
lon washing brush, hold the Juice Disc under
running water and brush from the inside of
the disc, hold it up towards a light to ensure
the fine mesh holes are not blocked. If the
holes are blocked soak the Juice Disc in hot
water with 10% lemon juice to loosen the
blocked holes. Alternatively wash the Juice
Disc in the dishwasher.

Do not soak either the juice extractor or the
puree extractor in bleach.

Always treat the juice extractor and puree
extractor with care as they can be easily
damaged.

Discolouration of the plastic may occur with
strongly coloured fruit and vegetables. To
help prevent this, wash parts immediately
after use.

If discolouration does occur, the plastic parts
can be soaked in 10% lemon juice and water
or they can be cleaned with a non abrasive
cleaner.

NOTE:
The Puree Insert is not dishwasher safe.
Please rinse in warm water.

NOTE:
To assist with cleaning soak the Juice
Disc in hot soapy water for approxi-
mately 10 minutes immediately after
juicing is completed. If pulp is left to dry
on the filter it may clog the fine pores
of the filter mesh thereby lessening
the effectiveness of the Juicer. For your
convenience a nylon cleaning brush has
been included with your Juice Extractor
JE 8011.

HINT:

To minimise washing up place a freezer bag (or
plastic grocery bag) into the Pulp Container to
collect the pulp. When juicing is completed sim-
ply remove the bag containing the pulp and
place the bag into a bin. (Refer page 38 for “Ideas
on Using the Pulp”.)

27

27

CARE AND CLEANING

Advertising