CDI Torque MULTITEST Government - Manual (Page 83)

6-5
2000-600-02 Manual Loader
D — Linear Bearings
May be slipped over the reaction pins to reduce friction when
testing very small or high resolution electronic wrenches.
E — Reaction Pins
Hold the reaction block in place.
C — Reaction Block
The reaction block is positioned so that the reaction pins
straddle the wrench handle at the hand hold position specified
on the wrench.
Adjustable stops on the reaction pins may be raised
or lowered to level the wrench prior to loading. Do
not place a second stop above the wrench handle. It
is normal for the wrench handle to rise as it levels
itself under load.
IMPORTANT
F — Drive Adaptor
A drive adaptor couples the wrench to the transducer. Low
torque MULTITEST series transducers use an internal-internal
drive adaptor and high torque MULTITEST transducers may use
an adaptor/reducer.
G — Transducer (Accessory)
The loader accepts all MULTITEST series single transducers
directly. An optional 2000-400-02 4-in-1 transducer can be
mounted using a 2000-500-02 adaptor kit. For more
information, refer to Appendix A–Accessories.