Cortelco CALLER ID TYPE 2 9120 - Manual (Page 14)

14
FEATURE BUTTONS
REDIAL/PAUSE BUTTON
1. To redial the last number dialed, come off hook and press REDIAL.
2. The selected number (32 digits maximum) will be redialed.
To review dialed numbers.
1.
While on hook, press REDIAL.
2. The display will show the last number dialed.
3. Use or to scroll through the list of dialed numbers. The last 15 dialed numbers
are stored.
4. To dial the displayed number, go off hook. The number will be dialed after
approximately 3 seconds.
While storing a number into memory dial, pressing this button will insert at pause.
FLASH BUTTON
This telephone provides a line break signal for accessing PABX services or for use of
Call Waiting from your local telephone company. If you have Call Waiting service, you
can use the Call Waiting function per the following instructions.
1. While having a conversation, another party calls and you hear a tone.
2. Press FLASH once and release. The first conversation is placed on hold and the
second call can be answered.
3. Press FLASH again and release. You may speak to the first caller again and the
second call is placed on hold.
AUTO DIAL BUTTON
Allows dialing of numbers in two touch memory.
MUTE BUTTON
Press MUTE to speak without the person on the phone hearing your conversation.
“MUTE” will show in the display. To resume the conversation, press MUTE.
MENU BUTTON
Press this button to access the Phone Book or to enter setup mode.
DELETE BUTTON
Use this button to delete characters on the display.
SAVE BUTTON
Use this button to store numbers in memory or the Phone Book.
ENTER/DIAL BUTTON
Use this button to confirm choices.