Cortelco CALLER ID TYPE 2 9120 - Manual (Page 16)

16
SPEED DIAL
The 9120 has 2 one-touch and 10 two-touch memories.
STORE NEW NUMBERS IN MEMORY 1 AND MEMORY 2
There are three ways to store numbers in the one-touch locations.
Method 1
1. Press SAVE until the display shows “-->”.
2. Enter the number to be stored.
3. Press SAVE.
4. The display will show “-->?”
5. Press MEMORY 1 or MEMORY 2.
6. The display will show “SAVE OK”.
Method 2
1. Place the phone on hook.
2. Enter the number to be stored.
3. Press and hold MEMORY 1 or MEMORY 2 until the display shows “SAVE OK.”
Method 3
1. Place the phone on hook.
2. Use the or key to display the desired number from incoming calls or dialed calls.
3. Press and hold MEMORY 1 or MEMORY 2 until the display shows “SAVE OK.”
DIAL A NUMBER FROM MEMORY 1OR MEMORY 2
Go off hook, and press the memory button. The number will be dialed out.
REVIEW THE CONTENTS OF A MEMORY BUTTON
While on hook, press the memory button. The display will show the memory contents.
To dial this number, go off hook.
STORE NEW NUMBERS IN TWO-TOUCH LOCATION
To store a number in the two-touch locations.
1. Press SAVE until the display shows “-->”.
2. Enter the number to be stored.
3. Press SAVE.
4. The display will show “-->?”
5. Press the desired location (1 - 9).
6. The display will show “SAVE OK”.
DIAL A NUMBER FROM TWO TOUCH MEMORY
Go off hook, and press AUTO DIAL. The press the location (1 - 9). The number will be
dialed out.