Code 3 MasterCom B Series - Manual (Page 2)

2
Introduction
The enhanced 3890 series siren is an improved series of electronic sirens that has been designed to meet
the needs of all emergency vehicles. This series of sirens incorporates the popular packaging and features
of the original Mastercom siren with microprocessor based circuitry and MOSFET technology. Most of the
original Mastercom features are available along with many new added features that are not available on any
other Code 3 siren such as; Park Kill, Instant "ON", Adj. Backlighting, " Scroll " Mode and more.
Standard Features
The enhanced 3890 series sirens consist of integrated controls and amplifier in a single package with 4 and
6 circuit lighting controls available as well. The models are as follows:
3892 - Primary Tones: Wail, Yelp, Hi-Lo, Air Horn
- Secondary Tones: HyperYelp, HyperLo
3892L4,L6 - Primary Tones: Wail, Yelp, Hi-Lo, Air Horn
- Secondary Tones: HyperYelp, HyperLo
- 4 or 6 auxillary lighting controls
2
Sirens are an integral part of an effective audio/visual emergency warning system.
However, sirens are only short range secondary warning devices. The use of a siren
does not insure that all drivers can or will observe or react to an emergency warning
signal, particularly at long distances or when either vehicle is traveling at a high rate of
speed. Sirens should only be used in a combination with effective warning lights and
never relied upon as a sole warning signal. Never take the right of way for granted. It is
your responsibility to be sure you can proceed safely before entering an intersection,
driving against traffic, or responding at a high rate of speed.
The effectiveness of this warning device is highly dependent upon correct mounting and
wiring. Read and follow the manufacturer’s instructions before installing or using this
device. The vehicle operator should check the equipment daily to insure that all features
of the device operate correctly.
To be effective, sirens must produce high sound levels that potentially can inflict hearing
damage. Installers should be warned to wear hearing protection, clear bystanders from
the area and not to operate the siren indoors during testing. Vehicle operators and
occupants should assess their exposure to siren noise and determine what steps, such
as consultation with professionals or use of hearing protection should be implemented to
protect their hearing.
This equipment is intended for use by authorized personnel only. It is the user’s respon-
sibility to understand and obey all laws regarding emergency warning devices. The user
should check all applicable city, state and federal laws and regulations.
Code 3, Inc., assumes no liability for any loss resulting from the use of this warning
device.
Proper installation is vital to the performance of the siren and the safe operation of the
emergency vehicle. It is important to recognize that the operator of the emergency
vehicle is under psychological and physiological stress caused by the emergency situa-
tion. The siren system should be installed in such a manner as to: A) Not reduce the
acoustical performance of the system, B) Limit as much as practical the noise level in the
passenger compartment of the vehicle, C) Place the controls within convenient reach of
the operator so that he can operate the system without losing eye contact with the road-
way.
Emergency warning devices often require high electrical voltages and/or currents. Prop-
erly protect and use caution around live electrical connections. Grounding or shorting of
electrical connections can cause high current arcing, which can cause personal injury
and/or severe vehicle damage, including fire.
PROPER INSTALLATION COMBINED WITH OPERATOR TRAINING IN THE PROPER
USE OF EMERGENCY WARNING DEVICES IS ESSENTIAL TO INSURE THE SAFETY
OF EMERGENCY PERSONNEL AND THE PUBLIC.
WARNING!
!