Coral Industries Style Swing Door/DPNL (1/4 Frameless) - 660 - Manual (Page 5)

660 6/09
On opposite side of unit, place hinge door stop (with
door attached) over wall jamb with bottom of door stop
seated in sill. For safety purposes, door should be
installed to open out from shower.
Door Panel
A
Sill
Hinge Door
Stop
attached to
Door Panel
OUTSIDE OF SHOWER
B Jamb
7 Hinge Door Stop and
Door Panel
Measure from wall to wall (over the top of both jambs)
and cut header (C) to that measurement.
Lower header into place over jambs.
B Jamb
C
Header
Door Panel B Jamb
OUTSIDE OF SHOWER
At bottom of door, snap sill / header insert (D) into sill
with tall edge of insert toward outside of shower.
At top of door, snap sill / header insert (D) into
header with tall edge of insert toward inside of shower.
B
C Header
B Jamb B
OUTSIDE OF SHOWER
Jamb
Jamb
D Top Sill/Header Insert -
tall edge toward inside
of shower
B
A
Sill
B
Jamb
B Jamb
Jamb
D
Bottom Sill/Header Insert -
tall edge toward outside of shower
E Magnetic Door Stop
E
Magnetic Door Stop
8 Header
(C)
9 Sill / Header Inserts
(D)
Magnetic
Door Stop E
Jamb
Door Panel
Hinge Door Stop B