Dynojet 250ix: Pit Installation Guide - Manual (Page 86)

In Ground Model 200iPX/250iPX Motorcycle Dynamometer Installation Guide
C H A P T E R 3
Air Brake
3-4
5 Route the air brake air hose through the access hole in the drum module upright
and through the pit conduit.
6 Connect your clean, dry shop air supply (60 psi, 415 kilopascal, max constant line
pressure) to the air hose.
Figure 3-3: Connect the Air Hose
PD219
air brake
pit conduit
to 60 psi
clean dry air
access hole