EFCO 526 Series - Manual (Page 48)

EFCO 1/2013 Page 48
Series 526 Impact Installation Instructions
After installing the 16G3 glass stop, run a bead of silicone type sealant across the seam
of the glass stop and jamb, then fill the gasket raceway with sealant. Tool the sealant to
make a watertight seal. See figure 53 below.
SECTION VIII: Glazing
Step 10) Inside Glazed Glass Stop Seal (Dry Glazed Only)
Sealant to
follow the
profile of the
glass stop.
[Fig. 53]