ETS-Lindgren 4825-2 LISN - Manual (Page 19)

5.0 Data
Characterizations for each measurement port of the Model 4825/2 Line
Impedance Stabilization Network (LISN) are included with the unit. The graphs
provide individual plots of both impedance and insertion loss data. Impedance is
plotted in a semi-log format where frequency is displayed on the horizontal from
9 kHz to 30 MHz. The vertical has a range of 0 ohms to 100 ohms and
represents the measured impedance of the unit. The insertion loss is also plotted
with frequency on the horizontal from 9 kHz to 30 MHz. The vertical of the graph
has a range of -9 dB to 1 dB and represents the measured insertion loss of the
Model 4825/2.
A Certificate of Calibration Conformance is provided with each Model 4825/2.
Data | 19