Final leveling of the table, Application of conductive grease – ETS-Lindgren 2188 Turntable User Manual

Page 20

Advertising
background image

Model 2188 Turntable

©ETS-Lindgren—January, 2006

Rev. B—P#399771

20

3.8. Final Leveling of the Table

Once the table is in place with the floor flange and wear strip
mounted, check that the table is level. Ensure that it is level and all
screws, nuts, and collars have been tightened.

3.9. Application of Conductive Grease

Before placing the turntable into operation, apply conductive grease
to the ground brush. Apply the contents of one tube of GC
Electronics conductive grease to the brush. Apply one tube per
meter size of the diameter of the table.

Advertising