ETS-Lindgren HI-3637 VLF Magnetic Field Meter - Manual (Page 26)

Page — 18 HI n 3637 Manual
materials. One of the criteria for certifying a
calibration to MIL standards requires Holaday
Industries to always ship equipment in the
specified packaging. When a MIL Standard
instrument is sent to Holaday in other
packaging, we must replace it with the
specified packaging materials for return
shipment. YOU WILL BE BILLED FOR THE
NEW PACKAGING.
If the instrument is under warranty, refer to the Limited
Warranty at the front of this manual for additional
information about your return.
Periodic/Preventive Maintenance
The HI n 3637 requires an annual calibration check to
verify that it is performing within specifications. This
calibration check may be performed by Holaday Service
Personnel at the factory. Return your meter(s), using the
original packing materials (if possible), to:
Holaday Industries Inc.
Attn. Service Department
14825 Martin Drive
Eden Prairie, MN USA 55344