ETS-Lindgren HI-3702 Induced Current Meter - Manual (Page 9)

Maintenance | 9
2.0 Maintenance
Before performing any maintenance,
follow the safety information in the
ETS-Lindgren Product Information
Bulletin included with your shipment.
Maintenance of the HI-3702 is limited to
external components such as cables or
connectors.
Do not open the HI-3702 housing.
Warranty may be void if the housing is
opened.
If you have any questions concerning
maintenance, contact ETS-Lindgren
Customer Service.
Take care to keep dirt and moisture from getting inside the housing of the
HI-3702 Clamp-on Induced Current Meter and on the coplanar surfaces of the
ferrite core that are exposed when the clamp-on sensor is open. The cushioned
case provides only minimal protection to the clamp-on sensor in keeping dirt or
other particulate matter from entering the gap on the inner side of the housing.
Do not use high-pressure sprays, and under no circumstance should the unit be
immersed in water or other liquid; the HI-3702 is not waterproof. Such actions
void the warranty.
WARRANTY