ETS-Lindgren HI-4455 Isotropic Field Probe (Archived) - Manual (Page 29)

HI-4455 Isotropic Electric Field Probe
© ETS-LINDGREN L.P. – August 2005
Revision D- Part No. H-600076 29
7. APPENDIX B: HI-4455 OPERATING
PROTOCOLS
The information in this appendix assumes that you have purchased the
optional HI-4413P Fiber Optic/RS232 Interface, and are capable of
communicating directly with the HI-4455 probe via computer. No system
readout is required when using this configuration.
COMMUNICATION PROTOCOL
Data Type: RS-232 Serial
Data Mode: Asynchronous
Word Length: 7 bit
Parity: Odd
Stop Bits: 1
Data Rate: 9600 baud
INFORMATION TRANSFER PROTOCOL
The HI-4455 operates as a Controller Mode device. This probe only
responds to commands from another device; it transmits no data without
receiving instructions to do so.
COMMAND STRUCTURE
A command to an HI-4455 probe consists of
1) a command letter, followed by
2) possible
parameters
3) terminated with a carriage return.
Archived 4/2/10