ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 17)

Getting Started | 17
• Power management— The default setting is turned off.
• Back light— The default setting is turned off.
• Screen saver— The default setting is turned off.
• Logging— The default setting is set to Single point. When the Log key
is pressed, the X, Y, and Z values are logged, as well as the
composite.
Overview of Screens
For a description of each screen, see Screens on page 23. For a description of
the keypad, see Keypad Operation on page 19.
The HI-4460 displays monitoring screens and logging screens. Press the up or
down MODE keys to toggle between the monitoring and logging screens.
• The monitoring screens display at power up. There are five monitoring
screens; the fifth screen displays when a standard is selected in the
MAIN menu. To cycle through the monitoring screens, press the
BACK/ENTER key or SCREEN/SELECT key.
• At the bottom of the screen are five menu selections. Press one of the
four function keys below the display on the HI-4460 to select the
indicated menu.
• Press the BACK/ENTER key or SCREEN/SELECT key to cycle
through the four logging screens. Eight menu selections are available
on the logging screens.
Archived 4/2/10