ETS-Lindgren HI-4460 Graphical Readout (Archived) - Manual (Page 37)

Menus | 37
PERCENT USED
The percentage of memory used.
SAMPLE RATE
The number of samples taken per second. If XYZ is selected, 2/sec will be
displayed. If COMP is selected, 6/sec will be displayed.
OPTIONS Menu
The OPTIONS menu is exclusive to
the monitoring screens. It is used to
set default values and zero the
probe.
SET TO DEFAULT
Returns to the default settings for each type of probe. The choices are NONE,
ALL, or ONE (for any of the probes supported by the HI-4460).
FIBER COMM TEST
Tests communication for the HI-4460 fiber optic connectors. Plug the two
connectors on one side of the fiber optic cable into the fiber optic connectors on
the HI-4460 and choose YES for FIBER COMM TEST. Results display near the
bottom of the screen.
Archived 4/2/10