FAB Defense VFR-AK - Manual

VFR-AK
AK-47 Handguard
Installation Instructions
Gas Tube and Handguard removal
Rotate the Gas Tube Retaining Lever upward until the Gas Tube can be
pulled upward at the back, and off the rifle (Fig. 2).
Fig. 2
3 Fig. 4 Fig.
1 Fig.
Rifle Disassembly (Fig. 1)
Gas Tube Retaining Lever
Using a wrench or a bench vise, gently lock across the flat side portions in
back of the Gas Tube. Grab the Handguard firmly and rotate it around the Gas
Tube axis until it is completely upside-down. Push straight down and off the
Gas Tube (Fig. 3,4).
WARNING!
Make sure your Rifle is unloaded before you begin any procedures.