FAB Defense VFR-AK - Manual (Page 3)

Front Retainer
Step 4.
• Place the Front Retainer on the Lower Handguard.
• Lock the Lower Handguard by turning thе Locking Lever 180 degrees (Fig.
9)
.
• Fasten Screws A & B of the Lower Handguard. Screw ‘A’ should be
fastened first.
A B
- 3 -
7 Fig.
8 Fig.
9 Fig.
Step 2. Slightly loosen screws A &B on the bottom of the Lower Handguard
without completely removing them (Fig. 7).
Step 3. Place the Lower Handguard on the receiver (Fig. 8).
Attention!!! Be careful of pointy and sharp edges during assembly!
Handguard Locking Lever