Operation, Setting the clock, Brewing programs – FARBERWARE 103744 12 Cup Coffee Maker User Manual

Page 10

Advertising
background image

10

11

OPERATION

Connect the plug

•

(9) to a wall outlet (ill.

i

).

The appliance is now is stand-by mode. On the display

•

(22), “12:00” will flash

for about 5 seconds and then change to be displayed constantly. The display

•

backlight will be fully illuminated for about 30 seconds before dimming.

NOTE: Pressing any button at any stage will cause the display backlight to switch to

full illumination for about 30 seconds before returning to being dimmed.

Setting the clock

NOTE: Setting the clock is required to be able to use the AUTO function.

NOTE: The appliance has a 12-hour display (-/PM).

Press and hold

•

HR (23) or MIN (21) button for about 1 second to enter the clock

setting mode.

Press the

•

HR button (23) to set the hours on the clock. Each press will advance

the clock by one hour.

Press the

•

MIN button (21) to set the minutes on the clock. Each press will

advance the clock by one minute.

NOTE: Press and hold either the HR (23) or MIN (21) button, to advance through

hours/minutes rapidly.

NOTE: The clock will be reset if the appliance is unplugged from the wall outlet.

The clock needs to be set again.

NOTE: If no button is pressed for about 5 seconds, the set time will be saved and

the appliance returns to stand-by mode.

Brewing Programs

The appliance has 4 preset programs for brewing.

While the appliance is in stand-by mode, press the

•

STRENGTH button (24) to

set the required brewing program. The default mode is NORMAl (not shown on

display).

12-cup Coffee Maker_103744_IM_US_V6_130125.indd 10

1/25/13 5:34:27 PM

Advertising