FARBERWARE 103744 12 Cup Coffee Maker - Manual (Page 14)

14
OPERATION
AUTO function
The appliance is equipped with an automatic brewing function, allowing you to set
the time you would like freshly brewed coffee.
NOTE: Using this function is only possible if the clock has been set.
NOTE: The time set, is the time the coffee will be ready.
Add the required amount of ground coffee in the permanent filter • (16) (ill. c ).
Fill the water tank • (6) with the required amount of water (ill. g ).
Select the required brewing program ( • Brewing programs).
Place the carafe • (12) on the keep warm plate (11).
Press and hold the • AUTO button (19) for about 1 - 3 seconds. The button starts
to flash.
Set the time by pressing the buttons • HR (23) and MIN (21).
Press the • AUTO button (19) to set and confirm the time. The AUTO button (19)
is illuminated.
NOTE: To cancel the AUTO function, press and hold the AUTO button (19) for about
3 seconds. The button will no longer be illuminated.
The • AUTO function is now set and the appliance will start the brewing process in
time to finish at the set time.
Once the brewing process starts, the • AUTO button (19) will switch off and
the button (25) will illuminate.
NOTE: The set AUTO time will remain set until changed or the appliance is
unplugged. To use the AUTO function again, first press and hold the AUTO button
(19) for about 1 - 3 seconds. Adjust the time if required and confirm by pressing the
AUTO button (19) again.
HINTS AND TIPS
As a general rule, one scoop of ground coffee equals one cup. •
It is recommended not to place appliance under wall units, as rising steam can •
cause damage to wooden furniture.
It is recommended using the charcoal filter although it is optional. •
12-cup Coffee Maker_103744_IM_US_V6_130125.indd 14 1/25/13 5:34:28 PM