Av in/out port, Transmitter, Camera – Fat Shark PredatorV2 CE User Manual

Page 6: Power (via discharge filter supply), Recording video

Advertising
background image

Fat Shark

6

RC Vision Systems

Transmitter

Channel select chart:

1 2 3 4

Ch1 5740 MHz

On

On

On

N/A

Ch2 5760 MHz

Off

On

On

N/A

Ch3 5780 MHz

On

Off

On

N/A

Ch4 5800 Mhz

Off

Off

On

N/A

Ch5 5820 MHz

On

On

Off

N/A

Ch6 5840 Mhz

Off

On

Off

N/A

Ch75860 MHz

On

Off

Off

N/A


Small white connector on back of transmitter is for
ImmersionRC Tiny Telemetry. See accessories.

Camera

2.8mm lens for wide angle 100 degree FOV; ideal for fixed camera piloting.
Camera is NTSC/PAL selectable (NTSC default, remove jumper on back for PAL).
Plugs camera directly into TX via included cable (pre assembled).

Power (via discharge filter supply)

The discharge filter supply allows you to power your downlink equipment from your
onboard RC pack. Connect as shown below:

AV in/out Port


RCA Connector: Yellow: Video, White:
Audio Left, Red: Audio Right

Recording Video

Connect AV cable to AV out port on right side of headset. Connect recording
device to cables and set up as per manufacturer directions.
Note: Cables pins are not all the same (see above chart), be sure to connect to
headset using the included cable.

Ground Video AudR AuL

Advertising