FBT QUBE SP27 - Manual (Page 16)

Editing Audio Parameters - Output Channels
Output Gain
The range of the control over the input gain is –40dB to +15dB in 0.1dB steps.
Output Polarity
The polarity (or phase) of each output may be switched individually as below.
Output Delay
The maximum available delay between any input and output is 650.00mS. For example, if the input delay on
channel A is set to 500mS, the maximum available output delay for any output fed from input A will be 150mS.
The readout units can be changed between time in milliseconds, distance in feet or distance in metres. Please
see page for more details.
Gain
Gain Output1 OP1
Output Gain = +6.0dB
-or+
Polar Output1 OP1
Polarity = [+]
x 0.3uS
0.1mm
Delay Output1 OP1
Delay = 0.0000mS
x 10uS
4mm
x 1mS
343mm
14