FEISOL CT-3472LV Tripod - Manual (Page 2)

© FEISOL INC, USA
WWW.FEISOL.NET
Page 2 of 5
To make Leveling adjustments, please unlock the twistlock located just below the
mainframe (see picture) by turning it half a turn in counterclockwise direction. Once the lock
is released, the axis of the Center Column can be moved to level. After setting the column
at the desired angle, turn the twistlock in clockwise direction to securely lock the column into
place. Please do not over-tighten.
To remove the Leveling Column (in order to install a flat Ball-Head mount/ Center Column
mount/ Leveling Base) , unscrew the plate at the bottom of the Center Column by turning it
counterclockwise (see picture).
Next, unlock the twistlock of the Center Column by turning it one turn in counterclockwise
direction, and pull the Center Column out of its mount. Finally, remove the remaining two
pieces of the Leveling Mount by unscrewing them. (For directions for installing alternate
mounts please see section A above).