Fiilex P200 - Manual (Page 7)

5
2
3
1
2
3
4
5
6
7
8
Mount Light Stand Adapter(M) to spigot on light
stand or tripod.
Insert Fiber into Fiber Mounting Hole (C) .
Slightly rotate until clicking into place.
Insert the DC power plug into P200 FlexJet DC
Power Input Jack (K).
Press On/Off Switch (I) to turn on P200 FlexJet.
Tighten Yoke Knob (F) to lock the P200 FlexJet in place.
Use the Color Selection Knob (G) to set the P200
FlexJet to a desired color.
Adjust the Intensity with Intensity Knob (H).
* Note : Fiber is sold separately