Fotodiox Aputure Trigmaster - Manual (Page 4)

1. Trigmaster 2.4G Channels
1 2 4 8
E.g.: channel 1
1 2 4 8 1 2 4 8 1 2 4 8
Channel Adjustment
Tips: The four small buttons on the bottom indicate the channel number.
2. Channels Adjustment Operation:
E.g.: channel 5 E.g.: channel 7
1 2 4 8
E.g.: channel 16
1 2 4 8
E.g.: channel 15
2.4G
Tips: Trigmaster 2.4G package includes a PC cord, which can be used to connect
to a camera which has no hot shoe mount.
Tips: When using Trigmaster 2.4G to control your strobe light, press the trigger
button on the transmitter to test synchronicity of the flash.
（Channel 1 is below） （Channel 5=1+4） （Channel 7=1+2+4）
（Channel 15=1+2+4+8） （All above）
Mount transmitter on camera, slide speedlight into receiver’s hot shoe.
Mount transmitter on camera, connect receiver to strobe flash by sync cable.
Connecting receiver to camera by remote cable. Set both units’ function
switch to ‘Camera’.