Cub Cadet 8354 - Manual (Page 54)

54
SECTION 6: SPECIFICATIONS
Model 8354
Maximum PTO Power 28.3 PS
Engine GROSS Power 35 HP
Engine Model 3A165D
Type Indirect injection, water cooled, 4-cycle diesel
Number of cylinders 3
Bore and Stroke 3.425 x 3.637 Inches
(87 x 92.4 mm)
Total displacement 100.5 cu. in (1,647 cc)
Rated revolutions 2700 RPM
Injection timing 18° before T.D.C.
Injection order 1-2-3
Compression ratio 22:1
Lubrication system Forced Lubrication
Cooling system Pressurized radiator, forced circulation with water pump
Alternator 12V, 50 amps
Weight (Dry) 394 Lbs. (179 kg)
Capacities Fuel tank 11.5 Gal. (43.7 L.)
Engine crankcase 6.1 Qts. (5.8 L.)
Engine coolant 7.4 Qts. (7.0 L.)
Transmission case 11.6 Gal. (44 L.)
Front axle case 2.0 Gal. (7.5 L.)
Dimensions
(with std.
tires) Overall length (without 3 pt.) 114.1 in.
Overall length (with 3 pt.) 126.3 in.
Overall width (max. tread) 57.1 in.
Overall height (Top of ROPS) 92.5 in.
Overall height
(Top of steering wheel) 59.4 in.
Wheelbase 65.7 in.
Ground Clearance 11.4 in.
Tread width
with std. tires Front 48.4 in.
Rear 42.4 - 54.6
Traveling
system Clutch Dry single stage
Steering Hydrostatic steering system
Transmission Synchronized shuttle and transmission
8 forward and 8 reverse speeds
Brake Traveling Wet disc type
Parking Connected to traveling brake
Differential Bevel gear
Hydraulic
system Hydraulic lift control system Position, Draft, and Mixed control
Pump capacity Main pump 7.8 gal./min. (29.7 L/min.)
Power strng. 4.7 gal./min. (17.8 L/min.)
Three point hitch SAE Category 1
Maximum lifting capacity
(at hitch lift point) 2270 lbs. (1021 kg)
No. or Remote control valve
ports 2 (optional)