Habey PRO-6820 - Manual (Page 40)

Launch LAN1/2/3/4/5/6 /PXE OpROM
Enable or disable boot option for legacy network device.
ACPI Settings
Setup system in deepest sleep mode S1/ S3
APM Configuration
Set RTC parameters
CPU Configuration
CPU parameters and options configuration
SATA Configuration
SATA Mode and Information Setting
Intel(R) Rapid Start Technology
Intel (R) Rapid Start Technology is developed by Intel Corporation and is
newly added to Intel 7 series CPU. Intel Rapid Start Technology enables
your system to get up and running faster from even the deepest sleep
within 5-8 seconds and continue with the work before entering the sleep
status, saving time and power consumption. This technology offers users
the following benefits:
1. High Security ----System will finally enter the S4 sleep mode. The data
is stored in HDD. So even the system is power down, the stored data
won’t be lost.
2. Fast Wakeup ---- only need 5-8 seconds to wake up from sleep mode,
twice as fast as that of 20 seconds from the traditional sleep mode.
3. Low Power Consumption ----The power consumption is almost at 0
when system is in sleep mode.
TO run this technology, you need the following:
1. Intel 7 series chipset based Motherboard
2. Board ACPI of (S3) mode. HDD: AHCI/RAID
3. Motherboard with SSD
4. Install Intel Rapid Start Technology Driver
5. Install Windows 7 or higher level OS
35