Habey PRO-6820 - Manual (Page 9)

Section 2 Installation Instructions
Safety Precautions
Electricity is used to perform many useful functions, but it can also cause
personal injuries and property damage if improperly handled. This product
has been engineered and manufactured with the highest priority on safety.
However, improper use can result in electric shock and/or fire. In order to
ensure your safety and prolong the service life of the system, please ob-
serve the following and read the following precautions when installing and
handling the product.
Warning!
Always completely disconnect the power cord from your chassis whenev-
er you work with the hardware. Do not make connections while the power
is on. Sensitive electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should open the Player
chassis.
Caution!
• When installing the heat conduction structure of the CPU and mother-
board MOS tube. Please make sure the thermal adhesive or thermal pad
is properly coated or sticked. Recommend to ask manufacturer technician
to install or provide guidance, so as to se cure good heat transfer perfor-
mance.
• The product has one 3Pin Green Phoenix power connector.
• It is normal that the temperature of the machine case will be a little bit
high when it is working.
• Please read the users manual in detail before using this product.
• Product specification and pictures are subject to change without prior
notice.
4