Canon FS 2720 U - Manual (Page 15)

15 CanoScan FS2720U Film Scanner
5. Close the film holder.
• Align the ends of the holder and lightly pinch them together until they lock.
• After you have locked the ends, squeeze and run your fingers along the middle
portion to prevent the film from floating.
6. Position the guide over the frame to be scanned.
• The guide will click into indents in the holder marking the correct position for
scanning as you slide it back and forth. Ensure that the tabs on the guide click
into the indents and that the image is correctly framed by the guide.
• Reload the film in the film holder if its edges stick out of the holder or the
guide’s movement is impeded.
Frame to be Scanned