Rear hard top removal – Jeep 2008 Wrangler User Manual
Page 130
Advertising
3. Reinstall panel(s) using the same steps for removal in
reverse order.
Rear Hard Top Removal
1. Remove both front panels. Refer to “Front Panel(s)
Removal” in this section.
2. Open both doors.
3. Remove the two Torx
head screws that secure the
hard top at the B-pillar (near top of door) using a #40
Torx
head driver (4–Door Only).
4. Remove the six Torx
head screws that secure the hard
top to the vehicle (along the interior bodyside) using a
#40 Torx
head driver.
5. Open swing gate all the way to ensure clearance of the
rear window glass. Lift rear window glass.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
129
3
Advertising