Spare tire stowage, Preparations for jacking – Jeep 2008 Wrangler User Manual

Page 368

Advertising
background image

Spare Tire Stowage

To remove the spare tire from the carrier, remove the tire
cover, if equipped, and remove the lug nuts with the lug
wrench turning them counterclockwise.

NOTE:

If you have added aftermarket accessories to the

spare tire mounted carrier, it cannot exceed a gross
weight of 50 lbs (23 kg) including the weight of the spare
tire.

Preparations For Jacking

Park on a firm level surface, avoid ice or slippery areas,
set the parking brake

and shift automatic transmission

into PARK, or manual transmission into REVERSE. Turn
OFF the ignition.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid being hit when operating the jack
or changing the wheel.

• Turn on the hazard warning flashers. Refer to “Hazard

Warning Flashers” in this section.

• Block both the front and rear

of the wheel diagonally oppo-
site of the jacking position.
For example, if changing the
right front tire, block the left
rear wheel.

• Passengers should not remain in the vehicle when the

vehicle is being jacked.

WHAT TO DO IN EMERGENCIES

367

6

Advertising