Automatic transaxle — if equipped – Jeep 2010 Compass - Owner Manual User Manual

Page 283

Advertising
background image

CAUTION!

If you skip more than one gear while downshifting
or downshift at too high a vehicle speed, you could
damage the engine, transmission, or clutch.

To maintain a safe speed and prolong brake life, shift
down to second or first gear when descending a steep
grade.

When turning a corner or driving up a steep grade,
downshift early so that the engine will not be
overburdened.

AUTOMATIC TRANSAXLE — IF EQUIPPED

NOTE:

The Continuously Variable Automatic Transaxle

(CVT) changes ratios in a continuous manner. This may
sometimes “feel” as if it is slipping, but this is normal and
does not harm anything.

CAUTION!

Damage to the transaxle may occur if the following
precautions are not observed:
Shift into PARK only after the vehicle has come to

a complete stop.

Shift into or out of REVERSE only after the

vehicle has come to a complete stop and the engine
is at idle speed.

Do not shift from REVERSE, PARK, or NEUTRAL

into any forward gear when the engine is above
idle speed.

Before shifting into any gear, make sure your foot

is firmly on the brake pedal.

NOTE:

You MUST press and hold the brake pedal down

while shifting out of PARK.

282

STARTING AND OPERATING

Advertising
This manual is related to the following products: